Aviom AN-16SBR Bedienungsanleitung PDF herunterladen (Seite 14)

7AN-16SBR Sy S t e m BR i d g e US e R gU i d e

mounted devices that produce high levels of heat, such as power amps.

EtherCon Connector

Some Aviom products use EtherCon® Cat‑5 connectors. The Neutrik EtherCon

connector is a dual RJ45 type connector. It can receive a standard Cat‑5e

cable or a cable fitted with the special heavy‑duty EtherCon connector.

When using a standard Cat‑5e cable, plug the cable into the center of the

jack; release the cable by pressing on the small plastic tab built into the cable

connector.

The locking EtherCon connector is similar to an XLR cable, the kind commonly

used on microphones. Insert an EtherCon equipped cable into the jack until

it clicks and locks in place. To remove the cable, press on the metal release

tab at the top of the panel‑mounted EtherCon jack and pull the connector

outward.

Cleaning and Maintenance Information

The exterior of your Aviom products should be cleaned with a dry, soft, lint‑

free cloth. For tougher dirt, you can use a cloth slightly dampened with water

or with a mild detergent.

When cleaning your Aviom products, never spray cleaners directly onto the

product surfaces. Instead, spray a small amount of the cleaning solution onto

a clean cloth first. Then use the dampened cloth to clean the product.

P No t e : Never use solvents or abrasive cleaners on the finished surfaces of

your Aviom products.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Keine Kommentare

Aviom AN-16SBR Bedienungsanleitung Seite 14